 |
| Author |
Visual flight path |
p51d
Posts: 120
Joined: 06.05.06
 |
| Posted on 28-05-2007 14:17 |
|
|
i'm doing the lessons on fsx and i'm have to practice flying, but to do so i need to activate the visual flight path.
Since i'm not completely knowledged on flying i dont know how to imput the frequency on the nav and the other datails.
Could anyone help me activating the visual flight path with simple language and steps so i can understand? |
|
| Author |
RE: Visual flight path |
jackfolla
Posts: 509
Joined: 11.04.06
|
| Posted on 28-05-2007 14:18 |
|
|
1) Open the Map and find the runway you want the Visual Flight Path for - it must have an ILS (a green feather eminating from the end of the runway).
2) Write down the ILS frequency for the runway.
3) Open the radio stack and enter that frequency into NAV1 making sure that the radio is turned on.
4) Go to Aircraft at the top and then click Visual Flight Path.
- Tick Enable VFP Box
- Choose linked radio NAV1
- Tick Plot Intercept Course
- Tick draw guides at altitude
There are also some other options that you can choose from. I hope that helps. |
|
|
|
| |