|
Author |
Concorde for FSX not working in Vista OS PART TWO |
aharonthenicepilot
Posts: 21
Joined: 08.10.07
|
Posted on 10-10-2007 04:59 |
|
|
Shalom and greetings all my pals,
Please first read my post called Concorde for FSX not working in Vista OS.
As promised, here are error messages as seen below when I selected Concorde in aircraft choice of FSX:
gauge created for Flight Sim 98 or early no longer support
PJD Concorde DME
gauge created for Flight Sim 98 or early no longer support
PJD Concorde ASI-Mach
gauge created for Flight Sim 98 or early no longer support
747 TOGA
gauge created for Flight Sim 98 or early no longer support
PJD Brake Pressure
gauge created for Flight Sim 98 or early no longer support
att1
gauge created for Flight Sim 98 or early no longer support
A320-RC.Clock-im-rate
gauge created for Flight Sim 98 or early no longer support
PJD Concorde Warning Lights
gauge created for Flight Sim 98 or early no longer support
carp707_trim
Also, I found it wierd that Concorde does not come with thrust trottle control??????? no reverse thrust???
Apart from those all problems, I have no problem using Concorde and flying it. However here is one more wierd thing. When I tested it by flying at Mach 1.5 which is far below Mach 2.0 limit, I get overspeed warning even though I know Concorde can do Mach 2.0 without overspeed warning.
Am I missing something???
I sure hope that Concorde freeware program is not screwing up my FSX software.
With warmest regards,
Aharon |
|
Author |
RE: Concorde for FSX not working in Vista OS PART TWO |
jackfolla
Posts: 509
Joined: 11.04.06
|
Posted on 10-10-2007 10:40 |
|
|
i am seeing from the error message that panel and cockpit was maked with gauges from fs98 2002 then they do not definitively works with FSX, it wasn't a problem caused by Vista.
Gauges for fsx needs to be at least for fs2004, previous version doesn't works.
The panel should be re-maked with FSX compatible gauges, also for the thruttle control. |
|
|
| |