Aircraft
selection menu
Open the aircraft.cfg of each vehicle in notepad and look for this section
below:
[fltsim.0]
title=M1-A1
sim=M1-A1
model=
panel=
sound=
texture=
checklists=M1-A1_CHECK
atc_id=M1-A1
atc_airline=Army
atc_flight_number=M1A1
ui_manufacturer=General Dynamics *
ui_type=M1-A1 *
ui_variation=Army *
visual_damage=1
* The ui variables will list the aircraft by manufacturer in the selection menu.
Nav2 radio
Add the following lines to the aircraft.cfg file of the vehicle you wish to have
Nav2 active:
[Radios]
Audio.1=1
Com.1=1, 1
Com.2=1, 1
Nav.1=1, 1, 1
Nav.2=1, 1, 0
Adf.1=1
Transponder.1=1
Marker.1=1
Remove brakes sign
1. Using notepad or wordpad, open up your FS2004.cfg file
2. Look for the section named (Sim).
3. Find the section which says:
(SIM)
SYSCLOCK=1
4. Add the line
show_brake_message=0 below SYSCLOCK=1
Overspeed message
Go to the menu: \aircraft\realism settings and then unchecking 'aircraft stress
causes damage'
Open aircraft doors
Press shift and E together. Not all models are equipped with this animation and
some will use the variable to animate another object.
Blurry textures
Mip Mapping and texture size play a part in this but so can video card settings.
To adjust these settings you can access the display properties and change the
texture size and turn off Mip Mapping.
FS2004 some aircraft have no wheelset on AI
Older models compiled with earlier version of FSDS1 do not show the undercarrige
properly. There is no fix for this other than to look for updated models built
with GMAX or FSDS2.
Virtual cockpits and 2d panels
Virtual cockpits in Flight Simulator 2004 are not easily transferred or
installed as they are a part of the compiled model file. The default 2d panels
are available and you can modify them easily. They are found in the vehicles
panel folder.
Can you increase fluidity by removing the FPS lock?
Not really. This setting allows the simulator to self-adjust to your preferences
with out much user intervention. If you have the target frame rate locked at 30
fps in settings\display and your computer is giving you 28FPS consistently then
your card will probably stay there regardless of the FPS lock you provide.
Installing 3rd party scenery in FS2004
Startup Screen > Settings > Scenery Library
Click Add Area button.
Browse to your scenery in your old
FS2002 folder.
Click on it to open it BUT DO NOT
highlight the scenery folder as we used to do (this would prevent it working).
Click OK
The scenery will now be at the top
of the list and Enabled.
Click OK
Exit FS by clicking the X at top
right corner of the Settings Screen.
Confirm that you wish to exit FS.
Now Re-Start FS and the scenery
will be added and the indexes rebuilt during the start up sequence.
Be sure you have doubleclicked the
scenery folder you are adding and that it is highlighted.
Config change for auto-rotation in default B206 and R22
1.) changed the two cyclic entries in the .cfg file to
2.0 from 1.0.
We now can get a right 360 in hover
if not using the pedals.
No CD 4 for runtime
1.)Download this file
to your hard drive.
2.) Copy and paste it into your root FS2004 directory saying yes to replacing
the exsisting one. Note: BACKUP YOUR ORIGINAL .EXE FILE.
Is Real Weather working?
It seems as though the reporting stations for FS2004 has not changed since
FS2000. The metar files are indeed always current but have a half-life of one
hour. One user has suggested that shifting patterns are usually 10 -15 mins
behind what happens in the real world. So, if the weather in FS2004 when loaded
is somewhat fair when it should be cloudy or thunderous give it 15 mins or so
before adjusting it yourself.
Runway and approach lights look
There are now scalars in the FS9
config file that will allow you to scale the size of each category of lights to
your liking. The values have to be added to the [DISPLAY] section of the fs9.cfg
file, they are set to 1.0 by default. This is a power user option and has no UI.
RUNWAY_LIGHTS_SURFACE_SCALAR
(scales edge, center, end, and touchdown lights)
RUNWAY_LIGHTS_VASI_SCALAR (scales
VASI lights)
RUNWAY_LIGHTS_APPROACH_SCALAR
(scales approach light bars)
RUNWAY_LIGHTS_STROBE_SCALAR (scales
RAILs and ODALs)
Pan the view in the 2D cockpit
In the fs9.cfg file add this line
in the (CONTROLS) section:
pan_in_cockpit_mode=1
NVIDIA FX video
card panels don't display
Use the 44.67 WHQL drivers or
higher, if they have not been released yet on www.nvidia.com download them at
www.guru3d.com
Pushback
With the push-back function:
SHIFT+P to start going back, SHIFT+P then 1 (main keyboard) to back and turn
left, SHIFT+P then 2 to back and turn right, and don't forget SHIFT+P again to
stop moving!
Custom view options
Enter your different settings, such
as fuel load, zoom, spot view position and distance, type of axis indicator etc,
and save the flight and set it as the default flight.
AI
aircraft
Press CTRL+W (key defined by
default in the US version) to open a window showing your plane in spot view,
press CTRL+W again to cycle between the ATC controlled aircraft in your
vicinity, press ] or right-click on it to close that window.
OBS with
the Boeing 747-400 panel
With NORM panel, switch to NAV. In
the center glass you will see the current course setting in the upper right
corner, click over the numbers to set the OBS...
Raise the seat in the cockpit view for an aircraft
Open the panel.cfg of the aircraft
you want to modify the default point of view for the forward view, and edit/add
the following line in the section: VIEW_FORWARD_DIR=X.X, Y.Y, Z.Z
Increase the
Pan rate
This is in the fs9.cfg under:
(CONTROLS)
KBDAIL=46
KBDELEV=46
KBDRUD=64
PAN_RATE=400 <----------- increase this value